Class Central is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

Georgia Institute of Technology

Introduction to Engineering Mechanics

Georgia Institute of Technology via Coursera

Overview

This course is an introduction to learning and applying the principles required to solve engineering mechanics problems. Concepts will be applied in this course from previous courses you have taken in basic math and physics. The course addresses the modeling and analysis of static equilibrium problems with an emphasis on real world engineering applications and problem solving.

The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license.

Syllabus

  • Forces and Particle Equilibrium
    • In this section, students will learn the definition of a force and how to represent a force as a vector in two (2D) and three (3D) dimensions. Students will learn the concept of particle equilibrium and equilibrium of systems of particles. Concepts will be reinforced with example problems.
  • Define and Calculate Moments
    • In this section, students will learn the definition of a moment. Students will calculate the moment of a force about a point, line or axis, and moment due to a couple.
  • Equilibrium and Equivalence of Force Systems
    • In this section, students will learn the equilibrium equations in two (2D) and three (3D) dimensions. Students will solve equivalent system problems. System force results will be defined and calculated.
  • Free Body Diagrams and Equilibrium Analysis Techniques
    • In this section, students will learn to analyze general equilibrium problems. Free Body Diagrams (FBD) will be defined. Concepts will be reinforced with example problems.
  • Application of Static Equilibrium Equations
    • In this section, students will apply the equilibrium equations to solve two (2D) and three (3D) real world engineering problems. There will be an extensive use of example problems to reinforce concepts from the course.

Taught by

Dr. Wayne E. Whiteman

Tags

Related Courses

Reviews

4.7 rating, based on 169 reviews

Start your review of Introduction to Engineering Mechanics

  • Profile image for Ozbi Ozbi
    Ozbi Ozbi
    I take it for fun. Very nice course it helps me understand force reactions and couple reactions. I think I will continue with another one on the list.
  • Anonymous

    Anonymous completed this course.

    I took this course along with the Applications course more than 3 years ago mostly for personal interest but also to give me something to do while I was laid up for six weeks after surgery. I couldn't stand the thought of watching TV more than a couple...
  • Anonymous

    Anonymous completed this course.

    Dr. Whiteman is a great professor, and his Coursera modules helped me a great deal in getting through my statics class. He is very good at making the material easy to understand, and he makes a point of verifying that all information presented is clear...
  • Anonymous

    Anonymous completed this course.

    I have learned things in the course that I did not know about statics and that was my intent. Except for mistakes, the lectures are very good. I would not be against actually taking courses from this instructor. I was very put off by the lack of formal...
  • Anonymous

    Anonymous completed this course.

    I am a Mechanical Engineer and like most of them engineers, I had very weak concepts of basics of Mechanical Engineering. Then I came across this series of courses from Dr. Whiteman and believe me or not, I have learned more from him than my 4 years at an engineering university. He has this amazing quality of delivering the concepts in a very easy, understandable way. I really want to thank Dr. Whiteman for designing this amazing course and Coursera for providing us the platform to learn. They are really serving the humanity and mankind.
    As for Dr. Whiteman. I would say Thank you, Sir!!!!
    You have my respect for the lifetime.
  • Anonymous

    Anonymous completed this course.

    I was skeptical about taking this type of course employing the "flipped classroom" method of learning, but I was blown away by the end of this course. The videos are incredibly helpful, especially when paired with the practice problems provided. As a distance learning student for this class, I was also nervous about not physically being in the classroom, but was given equal opportunity for assistance throughout the semester.

    I can now say that I am extremely confident in my engineering mechanics ability and that this course greatly influenced my success in the following course, deformable bodies.

    I highly recommend this course and Dr. Whiteman to anyone who needs to take statics.
  • Anonymous
    It is an interesting course. It will be helpful for engineering students. The teacher explained every point in detail and was easy to understand. I recommend this course if you want to learn basic engineering mechanics.
  • Anonymous

    Anonymous completed this course.

    I decided to take this course a few years ago after failing my university's Solid Mechanics course, a requirement for my degree. Dr. Whiteman's videos proved to be clear, concise, and extremely helpful. The material was challenging but after completing this course I became confident in all of the material that I had failed to grasp in my university course. The next year, I retook the Solid Mechanics course and passed--something I couldn't have done without this course to help me. I will be graduating next year.
  • Anonymous
    Its very useful, I think it is the best course

    I have completed . Thanque, please improve your video quality.
  • Anonymous

    Anonymous completed this course.

    Had been out of school for years, and this course helped me brush up my knowledge on Mechanics. I felt like I understood Statics and Dynamics even better after taking this course, than when I was still an undergrad.
  • Anonymous
    Learning "Introduction to Engineering Mechanics with Dr. Whiteman" has been a superb experience. The clarity of teaching, coupled with the level of engagement and class exercises, always prompts the question, "Why am I just discovering this?". I would not have believed that it was possible to understand Engineering Mechanics the way I do, having taken this course. I sincerely appreciate the Georgia Institute of Technology and Dr. Whiteman for their time and effort, and the privilege to study this course amazingly. This is "Engineering Mechanics brought to life"!! Thanks a lot.
  • Anonymous
    I found this course really and extremely useful for both graduated and ungraduated students. The tutor of thiß course has a really profitable method for educating it. I am really satisfied for enrolling in the introduction of mechanical engineering because by it I am able to enhance my skill, and master in the primary definition of a mechanic, totally it has been good for me so far and I am going to continue in this rewarding course.Thank you
  • Anonymous
    There's not really any issues to be found with the course. Dr. Whiteman explains in great detail and does the course in a way where you can practise what was learned on the spot so you're not lost. The forums are really good as well if you don't understand something from the lecture video the forums are interactive and a lot of the times any question you have will have been answered already on the forum.
  • Anonymous

    Anonymous completed this course.

    As a whole, the course “Introduction to Engineering Mechanics” is a very informative and supportive of anyone who are looking to truly understand physics. The lecturer, Dr. Wayne Whiteman teaches very well as he is always trying to illustrate a situation...
  • Sana Khan
    This college is one of the best colleges in bareilly. It wasn't my first choice but after getting into it I found it out that it was rather a good option. The faculty is experienced and is very dedicated. There are many cultural clubs for students to enhance their skills and boost their confidence. Discipline might be one of the key factors of our institute.
  • Anonymous
    Great course. Good videos and excellent explanations. Only complaint is the lack of solutions to most of the practice problems. Expect to spent a fair amount of hours each week, there are a lot of problems to do and make sure to do each and everyone. They really strengthen your problem solving abilities.

    Would recommend this course. A++
  • Anonymous
    This course is very interesting. Every important concept was covered.The Faculty teaching the course has a good grip on the subject . The only drawback that I have is that we cannot have multiple attempts for the assignment. We have just one attempt and if we fail we would have to wait for a week to reappear in the that assignment
  • Anonymous
    I just love your way of teaching. Your understanding regarding subject, way of deliver the content, its selection, its partition in modules is fantabulous. I am really enjoying your teaching . Also it a great effort to provide the content free from a very recognized university in this situation of pandemic.
  • Anonymous
    Overall the learning experience was great.

    But my sincere request is to reduce the time for the quiz to try again (168 hrs).

    Because I solved all 5 quizzes but unfortunately the quiz but one of the five quizzes has only 33.33% (two answers wrong) and the other four marks are 100%.

  • Anonymous

    Anonymous completed this course.

    It was a great experience to do this course with Dr. Wayne E. Whiteman ( from Georgia Institute of Technology-a great institute too), I highly recommend these types of courses, at least you summarize the important ideas, and get familiar with e-learning.
    pros:
    1-abbreviated, time effective learning
    2- Dr Whiteman has easy to understand language besides straight forward attitude of explaining subjects
    cons:
    1- I found the course to be a little easy (it's just an introduction as stated)
    2- I hope to see like more animation or real life videos.
    last word, thanks for all (class-central website,Georgia Institute and Dr Whiteman), you for sure will not waste your time here.
    best regards

Never Stop Learning!

Get personalized course recommendations, track subjects and courses with reminders, and more.

Sign up for free