Class Central is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

NPTEL

Digital Circuits and Systems

NPTEL and Indian Institute of Technology Madras via YouTube

Overview

Lecture series on Digital Circuits & Systems by Prof.S.Srinivasan, Department of Electrical Engineering, IIT Madras. You will learn Introduction to Digital Circuits - Combinational Logic Basics - Combinatioal Circuits - Logic Simplification - Karnaugh Maps And Implicants - Logic Minimization Using Karnaugh Maps - Karnaugh Map Minimization Using Maxterms - Code Converters - Parity Generator And Display Decoder - Arithmetic Circuits - Cary Look Ahead Adders - Subtractors - 2's Complement Subtractor And BCD Adder - ARRAY MULTIPLIER - Introduction to Sequential Circuits - S-R,J-K and D Flip Flops - J-K and T Flip Flops - Triggering Mechanisms of Flip Flops and Counters - UP/DOWN COUNTERS - SHIFT REGISTERS - Application of Shift Registers - STATE MACHINES - DESIGN OF SYNCHRONOUS SEQUENTIAL CIRCUITS - DESIGN USING J-K FLIP FLOP - MEALY AND MOORE CIRCUITS - PATTERN DETECTOR - MSI AND LSI BASED DESIGN - MULTIPLEXER BASED DESIGN - Encoders and Decoders - Programmable Logic Devices - Design using Programmable Logic Devices - MSI & LSI based Implementation of Sequential - Design of Circuits Using MSI Sequential Blocks - System Design Example - System Design Using the Concept of Controllers.

Syllabus

Lecture1 - Introduction to Digital Circuits.
Lecture-2-Introduction to Digital Circuits.
Lecture 3 Combinational Logic Basics.
Lecture 4 - Combinatioal Circuits.
Lecture 5 Logic Simplification.
Lecture 6 - Karnaugh Maps And Implicants.
Lecture 7 - Logic Minimization Using Karnaugh Maps.
Lecture 8 - Karnaugh Map Minimization Using Maxterms.
Lecture 9 - Code Converters.
Lecture 10 Parity Generator And Display Decoder.
Lecture 11 Arithmetic Circuits.
Lecture 12 - Cary Look Ahead Adders.
Lecture13 - Subtractors.
Lecture 14 - 2's Complement Subtractor And BCD Adder.
Lecture 15 - ARRAY MULTIPLIER.
Lecture 16 Introduction to Sequential Circuits.
Lecture 17 - S-R,J-K and D Flip Flops.
Lecture 18 - J-K and T Flip Flops.
Lecture19 - Triggering Mechanisms of Flip Flops and Counters.
Lecture 20 - UP/DOWN COUNTERS.
Lecture 21 - SHIFT REGISTERS.
Lecture 22 - Application of Shift Registers.
Lecture 23 - STATE MACHINES.
Lecture 24 - DESIGN OF SYNCHRONOUS SEQUENTIAL CIRCUITS.
Lecture 25 - DESIGN USING J-K FLIP FLOP.
Lecture 26 MEALY AND MOORE CIRCUITS.
Lecture 27 - PATTERN DETECTOR.
Lecture 28 - MSI AND LSI BASED DESIGN.
Lecture 29 - MULTIPLEXER BASED DESIGN.
Lecture 30 Encoders and Decoders.
Lecture 31 - Programmable Logic Devices.
Lecture 32 - Design using Programmable Logic Devices.
Lecture 33 - Design using Programmable Logic Devices.
Lecture 34 - MSI & LSI based Implementation of Sequential....
Lecture 35 - MSI and LSI Based Implementation of Sequential.
Lecture 36 - Design of Circuits Using MSI Sequential Blocks.
Lecture 37 - System Design Example.
Lecture 38 - System Design Example (Contd..).
Lecture 39 - System Design Using the Concept of Controllers.
Lecture 40 - System Design Using the Concept of Controllers.

Taught by

nptelhrd

Reviews

4.3 rating, based on 3 reviews

Start your review of Digital Circuits and Systems

  • it is very helpfull and it is needed for future to know about digital circuits and systems. kind of lecture is very good and its very clear. mostprobably i will use this terms in my future higher studies

  • So easy to understand...i understand everything every little topic cover in this course...i will suggest my each and every friend about this course must try
  • It is very useful for us.Basically I am electrical and electronics engineering student from tamilnadu.

Never Stop Learning.

Get personalized course recommendations, track subjects and courses with reminders, and more.